LC Quad Singlemode Adapter with Flange APC Polishing Adapter
A normal fiber adapter suits for LC type connector to LC type connector with APC polishing type
LC Quad Singlemode Adapter with Flange, ≤0.2dB Insertion Loss
LC Quad Singlemode Adapter with Flange Fiber Optic Adapters(also known as couplers), are connection components in fiber communication system. And LC Quad Singlemode Adapter with Flange are widely used in ODF (Optical Distribution Frame), HTTF (Fiber to the Home), fiber optical communication equipment. And these adapters possess the feature of stability and reliability.
We can make the LC Quad couplers connect single-mode or multimode cables together where each cable has four fibers.
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called “hybrid”, accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
|Connector Type||LC/APC Single-mode Quad Fiber Optical Adapter|
|Insertion Loss||SM <0.2dB|
|Operation Temperature (℃)||-40℃ ～+80℃|
|Sleeves Material||Zirconia Ceramic|
Send Inquiry Now
Contact us in 15 seconds for FREE Sample & Discount ! We will be always trying our best to get back to you within 1 - 3 hours.