FC to SC Fiber Adapter Simplex 9/125μm Single-mode Adapeter
Signal from SC type connector cables enable to maximum transfer to FC type connector cables
FC to SC Fiber Adapter Simplex Single-mode Adapeter, ≤ 0.2dB Insertion Loss
FC to SC Fiber Adapter hybrid fiber optic adapters have both plastic housing and metal housing two types, the formal connect SC connectors cables and the latter connect FC connectors. SC to FC connector adapters are used to extend the length of cables( jumpers/ pigtails) in a run. There is dust cap to protect the ceramic sleeve to be clean.
This SC to FC hybrid adapters apply to network environments integrating different configurations and telecommunications networks.
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called “hybrid”, accept different types of connectors (FC to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment would be bump and broken. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
|Connector Type||FC to SC Fiber Adapter Switchable Fibe Optic Adapter|
|Insertion Loss (dB)||≤0.2|
|Operation Temperature (℃)||-40℃ ～+80℃|
|Sleeves Material||Zirconia Ceramic|
Send Inquiry Now
Contact us in 15 seconds for FREE Sample & Discount ! We will be always trying our best to get back to you within 1 - 3 hours.