SC Male to ST Female Fiber Optic Adapter Simplex SM Adapter
A adapter is switchable with SC and ST type connectors, yellow cables
SC Male to ST Female Fiber Optic Adapter Simplex SM Adapter, Metailc Housing
SC Male to ST Female Fiber Optic Adapter hybrid adapters/couplers are passive devices connecting two fibers ( patch cord or pigtails). It’s ok to use this type adapters to link single mode( 9/ 125 μm) or multimode( 50/ 125 μm or 62.5/ 125 μm).
This SC Male to ST Female hybrid adapters apply to network environments integrating different configurations and telecommunications networks.
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called “hybrid”, accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment would be bump and broken. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
|Connector Type||Switchable Fiber Optic Adapter|
|Insertion Loss (dB)||≤0.2||≤0.25|
|Operation Temperature (℃)||-40℃ ～+80℃|
|Sleeves Material||Zirconia Ceramic|
Send Inquiry Now
Contact us in 15 seconds for FREE Sample & Discount ! We will be always trying our best to get back to you within 1 - 3 hours.